3P Technik Filtersysteme GmbH

3P Twin Filter

Artikel No. 1000650

Rainwater filter for bigger roof areas. The Twin Filter can be installed in a pilot shaft or in frost-protected regions directly on the wall. Normally standard concrete shafts are used (Ø 1000 mm). The filter can be delivered to the site pre-installed in the shaft.

Two step cleaning system, therefore high level of filtering efficiency, independent of flow rate. Due to the steep inclination of the filter cartridge the dirt is continuously cleaned away into the sewer. The cleaned water is collected in a tank and directed into the storage.

Connection capacity for roof areas up to 700 m². Because of a Bypass-Installation a bigger area can be connected.

Max. Flow Rate Sieve insert 3,0/sec = 10,8 m³ cleaned water per hour.

Rainwater inlet: 2 x DN 100/ DN 150
Tank inlet: 2 x DN 100/DN 150
Outlet into sewer: 2 x DN 100/ DN 150

The filter has to be cleaned depending on the contamination 1 - 2 times during the year.

For US residents, please visit www.3ptechnik.com

© Copyright 2017 3P Technik Filtersysteme GmbH - All rights reserved